Major Nikon Z9 firmware update version 4.00 released
The previously rumored Nikon Z9 firmware update version 4.00 is now officially released and it is a major update – here are the changes:
Nikon Z9 firmware update version 4.00 additional coverage (the new “Auto Capture” feature)
Note: Users of the following software will need to update to the latest versions.
- Camera Control Pro 2 version 2.36.0 or later, IPTC Preset Manager version 1.3.0 or later, NX Studio version 1.4.0 or later, NX MobileAir version 1.2 or later (Android edition), NX Field version 1.4 or later
Note: The changes listed below under “Still Photography”, “Video Recording”, “Playback”, “Controls”, “Displays”, and “Network (Also NX Field)” are detailed in the Supplementary Firmware Update Manual.
■ Still Photography
- Added [Auto capture] to the photo shooting menu. Users can select capture criteria from [Motion] (the direction the subject is moving), [Distance] (how far the subject is from the camera), and [Subject detection] (whether or not a subject of a given type is detected), and the camera will take photographs automatically while it detects subjects that meet the selected criteria. Note that [Distance] is available with NIKKOR Z lenses and may not function as expected when used with other lenses.
- The length of time the camera will continue to buffer frames before cancelling shooting during the Pre-Release Capture phase of high-speed frame capture has been increased from 30 to 300 seconds.
- Added [Large] to the size options available for [Role played by card in Slot 2] > [JPEG Slot 1 – JPEG Slot 2] in the photo shooting menu.
- Added new bracketing increments for use during auto bracketing with [AE & flash bracketing], [AE bracketing], or [Flash bracketing] selected for [Auto bracketing set]. This change also applies to [Interval timer shooting] > [Options] > [AE bracketing] > [Increment].
■ Video Recording
- Added [Auto capture] to the video recording menu. Users can select capture criteria from [Motion] (the direction the subject is moving), [Distance] (how far the subject is from the camera), and [Subject detection] (whether or not a subject of a given type is detected), and the camera will record video automatically while it detects subjects that meet the selected criteria. Note that [Distance] is available with NIKKOR Z lenses and may not function as expected when used with other lenses.
- Added low ISO sensitivity options to [ISO sensitivity settings] > [ISO sensitivity (mode M)] for use during N-Log video recording.
- Changed the range of speeds available for Hi-Res Zoom.
- Added slow-motion video recording.
■ Playback
- Made changes to the [Select for upload to computer] and [Select for upload (FTP)] items in the playback “i” menu and added [Select for priority upload to computer] and [Select for priority upload (FTP)].
■ Controls
- Added support for the power zoom feature on power zoom lenses.
- Added an [Exposure delay mode] item to the [CUSTOM SETTINGS MENU] in position d6.
- Added to the custom controls and roles assignable via the following items in the [CUSTOM SETTINGS MENU]. New reset options have also been added.
- f2[Custom controls (shooting)]
- f3[Custom controls (playback)]
- g2[Custom controls]
- Among the roles that can now be assigned via Custom Settings f2 [Custom controls (shooting)] and g2 [Custom controls] is [Switch eyes], which can be used to switch focus between the subject’s left and right eyes.
- A new [Frame advance zoom position] > [Prefer focus point] role for Custom Setting f3 [Custom controls (playback)] can be used during playback zoom to center the display on the active focus point for each picture when scrolling through pictures using a command dial.
- Made updates to [Non-CPU lens data] in the [SETUP MENU].
- Increased the character limit for “Category” entries in IPTC presets.
- Restructured the [Camera sounds] item in the [SETUP MENU] with the addition of new options, including new sounds and volume level adjustment for the electronic shutter.
■ Displays
- Added focus-distance information to the focus distance indicator displayed during manual focus.
- The option selected for [Viewfinder display size] (formerly [Finder display size (photo Lv)]) in the [SETUP MENU] now also applies in video and playback modes.
■ Network (Also NX Field)
- Made changes and additions to the [Connect to FTP server] item in the [NETWORK MENU].
- Changed the procedure used when configuring the camera for synchronized release, increasing to twenty the number of groups that can be created, while the number of cameras in each group that can be controlled from the master camera has been increased to sixteen.
- Added [Overwrite copyright info] under [Connect to other cameras] in the [NETWORK MENU].
■ App-Related Changes
With NX MobileAir:
- the camera live view display for photo mode now shows NX MobileAir status, and
- camera settings saved to a memory card using [Save/load menu settings] can now be downloaded to the smart device or copied from the smart device to the camera memory card using NX MobileAir.
■ Other Changes
- Improved the accuracy of [3D-tracking] for small, fast-moving subjects when [Auto], [People], [Animal], or [Vehicle] is chosen for [AF subject detection options] and no subject of the selected type is detected.
- Improved focus accuracy for dark, low-contrast subjects.
- Improved focus lock-on with flicker detection in low-speed continuous release mode.
- Made other improvements to the autofocus operation and its reliability.
- Improved the performance of auto white balance during portrait photography.
- Fixed an issue that sometimes resulted in the viewfinder darkening during playback when [Auto] was selected for [Viewfinder brightness].
- It is now easier to obtain the correct exposure from the first shot during interval-timer photography in high-contrast settings or settings dark enough for starlight view.
- The histogram display is no longer available when starlight view is enabled.
- Changed the video low-capacity warning so that it is now displayed in white on a red background when there is less than one minute remaining. The warning is now also displayed when recording is not in progress.
- Users now have more precise control when scrolling through videos during playback using the progress bar.
- Fixed the following issues:
- The camera would sometimes stop responding if the standby timer was reactivated after having expired with [Prioritize viewfinder (1)] or [Prioritize viewfinder (2)] selected for [Limit monitor mode selection] and high-speed frame capture selected for [Release mode].
- The camera would sometimes stop responding if changes were made to Picture Control parameters during NEF (RAW) processing.
- The viewfinder would in rare instances fail to display the focus point correctly during burst photography.
- [Image size] could not be adjusted by holding the QUAL button and rotating the sub-command dial if a DX-format lens was attached with [ON] selected for [Image size settings] > [Enable DX image sizes].
- SB-800 flash units would sometimes stop responding after pictures were taken with the flash disabled.
- [Vignette control] would sometimes fail to correctly control vignetting when an option other than [Off] was selected.
- Users could no longer select the FX image area after choosing the DX image area in Camera Control Pro 2 with a 100p or 120p option selected for video frame rate.
- Focus could still be adjusted using the focus ring when [Disable] was selected for [Manual focus ring in AF mode] in the [CUSTOM SETTINGS MENU] if an option other than [Non-linear] was chosen for [Focus ring rotation range] in the [CUSTOM SETTINGS MENU].
- The battery would draw down more quickly while the camera was off if [ON] was selected for [Connect to smart device] > [Wi-Fi connection] in the [NETWORK MENU] even if [OFF] was selected for both [Bluetooth connection] and [Upload while off].
- The German and Korean menus and help text contained typos.
Here is the official press release:
NIKON RELEASES THE THIRD MAJOR FIRMWARE UPGRADE FOR THE NIKON Z 9 FULL-FRAME MIRRORLESS CAMERA
Free Firmware V 4.00 Upgrade Offers New Smart Auto Capture Function, Video Enhancements, Shutter Sound Customization and More
MELVILLE, NY – Today, Nikon Inc. announced the release of firmware version 4.00 for its flagship full-frame/FX-format mirrorless camera, the Nikon Z 9. The firmware 4.00 update is the third major update to the Z 9 since its launch, adding more enhancements to video and photo capture, usability, operability, autofocus and more.The upgraded firmware version 4.00 adds several new features for both still and video shooting, including the all-new Auto Capture function. This new feature enables automatic shooting when the subject meets one or more pre-configured criteria particularly in situations that require increased automation or when the camera must be positioned in places where the user cannot remain for extended periods of time.
Additionally, video functions have been further improved by expanding the minimum ISO sensitivity available with N-Log recording, increasing the number of options available for Hi-Res Zoom speed and adding slow-motion video recording. With still-image shooting, the subject acquisition performance of 3D-tracking when capturing stills of small and fast-moving subjects1 has been improved. The firmware also supports enhanced operability by increasing the number of functions that can be assigned to custom controls, as well as the addition of new shutter sound options.
Starting today, Z 9 owners can visit the website here to download firmware 4.00 for free. Nikon will continuously meet users’ needs through firmware updates that expand the functionality of its cameras.
New and Enhanced Features
Auto Capture:
- Users can set the camera to automatically record still images or video by pre-configuring Auto Capture criteria. The three criteria that can be configured include a [Motion] option that detects subjects that make certain movements, a [Distance] option which begins shooting when a subject is within a certain range of distances,2 and a [Subject detection] option which detects a person, animal or vehicle within the frame. These options can be used either separately or together to automatically trigger shooting when the selected criteria are met.
- This feature allows the user to shoot remotely and without having to manually determine the timing of shooting/recording, enabling more freedom to perform other tasks, or to leave their camera outside in places they cannot remain for extended periods of time, such as when recording wild animals.
- When using more than one Z 9, one camera can be used for hand-held shooting as the user moves from place to place, with the other cameras can be set up for automatic shooting from tripods at fixed locations. Auto Capture also enables shooting from multiple angles without using the extension cords previously required to control multiple cameras, eliminating worries about connections during remote shooting. This feature can also be used with the Pre-Release Capture function for more reliable capture of decisive moments.
Advanced Video Recording Functions:
- ISO sensitivity can now be set as low as Lo 2.0 (ISO 200) with N-Log recording: ISO sensitivity has been expanded on the low end to increase dynamic range in shadows and enable rich and clear expression of shadow tones in which noise is suppressed.
- Hi-Res Zoom speed options: Speed steps have been increased from 3 to 11 for more precise speed control. Finer adjustment of the zoom speed is now possible, enabling a look that better matches the user’s intent with more stable zooming at slower speeds, for example.
- Slow-motion video function: This new feature enables high-speed recording of videos that play back at 1/4 (4×) or 1/5 (5×) the frame rate for a slow-motion effect.
Additional Shooting Enhancements:
- Customizable shutter sound: Users can choose from five types of shutter sound played when the shutter is released and set a higher volume for the sound.
- Focus enhancements: Superior subject acquisition performance with 3D-tracking is used to capture stills of small and fast-moving subjects that cannot be detected with subject detection.
- Pre-Release buffer expansion: To better respond to the needs of those working on location, the length of time the camera continues to buffer frames before canceling shooting during the Pre-Release Capture phase of High-Speed Frame Capture has been increased from 30 to 300 seconds, allowing users to wait longer between the half press and full press of the shutter-release button.
- Exposure delay mode: This item is added to the Custom Settings menu, which helps to reduce blur caused by the camera shake that occurs when the shutter-release button is pressed.
- More custom controls: The number of functions that can be assigned to custom controls has been increased, as well as the number of controls that can be customized.
- Improved manual focus UI: The focus distance indicator for manual focus newly displays the approximate distance between the camera and the focus position in units selected by the user.
- Playback enhancements: The new [Frame advance zoom position] option that allows users to choose how the camera centers the display when scrolling through pictures during playback zoom can now be assigned to a custom control. When [Prefer focus point] is selected, the camera centers the display on the focus point active with shooting. Additionally, the accuracy of the progress bar displayed with video playback has been increased.
For more information about the latest Nikon products, including the vast collection of NIKKOR Z lenses and the entire collection of Z series cameras, please visit nikonusa.com.