Several Nikon 1 firmware updates released

Nikon-1-V2-camera-system

Today Nikon released several firmware updates for the Nikon 1 V1, V2, J1, J2, J3, S1 cameras, FT1 adapter and GP-N100 GPS unit. The main fixes are support for the new 32mm f/1.2 lens and continuous AF for the FT1 adapter:

Nikon 1 V1 firmware update 1.30

  • Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added. To use this function, the Mount Adapter FT1 firmware must be Ver. 1.10, which supports this function.
  • Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
  • The following changes to playback zoom for images captured in MF (manual focus) focus mode have been applied.

– 1× magnification has been added.
– The amount of time allowed to pass before normal display is restored when no operations are performed after playback zoom is applied has been reduced.

  • When shooting in Electronic (Hi) release mode at 10 fps using the Mount Adapter FT1, the shutter speed displayed with a half press of the shutter-release button and that displayed when the shutter-release button was fully pressed differed.  This issue has been resolved.
  • The precision of time synchronization when the GPS Unit GP-N100 is attached to the camera and the Use GPS to set clock option is set to Yes has been increased. However, errors in time synchronization using GPS cannot be completely eliminated. Please update GP-N100 firmware to Ver. 1.02, which supports this improvement.

Nikon 1 V2 firmware update 1.10

  • 1 NIKKOR lens firmware can now be updated.
  • Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added. To use this function, the Mount Adapter FT1 must be Ver. 1.10, which supports this function. When updating both the camera and FT1’s firmware, be sure to update the Nikon 1 V2 firmware before updating the FT1 firmware.
  • Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
  • 1× magnification has been added to playback zoom ratios for images captured in MF (manual focus) focus mode.
  • Electronic viewfinder display in Auto and P, S, A, and M shooting modes is now smoother.
  • An issue that caused images to be darker than expected when captured with continuous shooting using the Mount Adapter FT1 and an AF-S lens has been resolved.
  • The precision of time synchronization when the GPS Unit GP-N100 is attached to the camera and the Use GPS to set clock option is set to Yes has been increased. However, errors in time synchronization using GPS cannot be completely eliminated. Please update GP-N100 firmware to Ver. 1.02, which supports this improvement.

Nikon 1 J1 firmware update 1.30

  • Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added. To use this function, the Mount Adapter FT1 must be Ver. 1.10, which supports this function.
  • Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
  • The following changes to playback zoom for images captured in MF (manual focus) focus mode have been applied.

– 1× magnification has been added.
– The amount of time allowed to pass before normal display is restored when no operations are performed after playback zoom is applied has been reduced.

  • When shooting in Electronic (Hi) release mode at 10 fps using the Mount Adapter FT1, the shutter speed displayed with a half press of the shutter-release button and that displayed when the shutter-release button was fully pressed differed. This issue has been resolved.

Nikon 1 J2 firmware update 1.10

  • Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added. To use this function, the Mount Adapter FT1 must be Ver. 1.10, which supports this function.
  • Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
  • 1× magnification has been added to playback zoom ratios for images captured in MF (manual focus) focus mode.

Nikon 1 J3 firmware update 1.10

  • Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added. To use this function, the Mount Adapter FT1 must be Ver. 1.10, which supports this function.
  • Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
  • 1× magnification has been added to playback zoom ratios for images captured in MF (manual focus) focus mode.

Nikon 1 S1 firmware update 1.10

  • Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added. To use this function, the Mount Adapter FT1 must be Ver. 1.10, which supports this function.
  • Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
  • 1× magnification has been added to playback zoom ratios for images captured in MF (manual focus) focus mode.

Nikon Mount Adapter FT1 L firmware update 1.10

  • Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added.

Nikon GP-N100 GPS unit firmware update 1.02

  • The precision of time synchronization when the GPS Unit GP-N100 is attached to the camera and the Use GPS to set clock option is set to Yes has been increased. However, errors in time synchronization using GPS cannot be completely eliminated.
This entry was posted in Nikon 1 and tagged . Bookmark the permalink. Trackbacks are closed, but you can post a comment.
  • FCC disclosure statement: this post may contain affiliate links or promotions that do not cost readers anything but help keep this website alive. As an Amazon Associate, I earn from qualifying purchases. When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network. Thanks for your support!

  • Back to top