< ! --Digital window verification 001 -->

Nikon Camera Control Pro 2.4.0, Capture NX 2.1.1 released

Nikon Camera Control Pro 2.4.0 changes in this version:

- Support for the D3X has been added.
- Windows 2000 is no longer supported.
- In some rare cases, when images with file sizes of 14 MB or larger were transferred, the transferred images were corrupted.  This issue has been resolved.

Windows link

Mac link

Capture NX 2.1.1 changes in this version:

- Support for RAW images captured with the D3X has been added.
- When images containing GPS information captured with another manufacturer’s digital camera were opened, GPS information was not displayed.  This issue has been resolved.
- When RAW images captured with another manufacturer’s lens and the camera’s Vignette control item in the shooting menu set to any option other than Off were opened, Capture NX 2 sometimes froze.  This issue has been resolved.
- When attempting to open 16-bit monochrome TIFF (LZW) images, Capture NX 2 quit unexpectedly.  This issue has been resolved.
- When attempting to open some images saved in NEF format using Nikon Capture or Capture NX Ver. 1.x, Capture NX 2 quit unexpectedly.  This issue has been resolved.
- When images were opened in Capture NX 2 Ver. 2.0.0 when the optional Picture Controls were not installed, and image Picture Control setting was modified and then a settings file saved, Picture Control settings were not accurately reflected when the settings file was applied to images later opened in Capture NX 2 Ver. 2.1.0 where the optional Picture Controls were installed.  This issue has been resolved.
- When attempting to save enhancements applied to images in some system environments, the enhancements were not saved.  This issue has been resolved.
- When multiple images were opened and white balance adjusted for each image using the Set Gray Point option under White Balance in the Camera Settings palette, an error message was displayed when clicking on the image after clicking the Start button.  This issue has been resolved.
- When Color Noise Reduction under Noise Reduction was adjusted and the image saved in NEF format, Color Noise Reduction effects were removed when the image was again opened and the Noise Reduction check box unchecked and then checked again when logged in to a Windows user account with a user name containing 2-byte characters.  This issue has been resolved.

Windows link

Mac link

This entry was posted in Nikon Software. Bookmark the permalink. Trackbacks are closed, but you can post a comment.
  • http://davidmcghee.net David McGhee

    These type of post are very helpful! Awesome!

    • http://nikonrumors.com/ [NR] admin

      Are you being sarcastic? Other readers are criticizing me that I should stick to rumors only… cannot make everybody happy… but I am trying :)

  • http://www.tdbphoto.com Thomas Del Brase

    Anyone else experiencing crashes with CCP2 – MAC 0SX TIGER – D2X ?
    I have been having this problem for months, and after the latest upgrade – 2.4.0 – the problem has worsened. Nikon can offer no explanation other than to pass buck to Adobe software.
    Here’s the problem: When shooting tethered via CCP2 and reviewing the results in ADOBE Bridge;
    1. CCP2 abruptly quits for no obvious reason.
    2. When images are deleted from Bridge – it causes CCP2 to quit.
    Occasionally CCP2 will restart and find the camera, however more times than not a reboot of the computer is necessary to relaunch CCP2 and have it find the camera.
    All firmware is up to date. Bridge is current. USB cables have been replaced with new. OSX is current. The D2X battery is 100%. The D2X and the laptop are both set to STAY AWAKE.
    CCP2 crashes are a total drag especially while clients are on set.
    I have not found any other tethering type software for MAC.
    Is Canon software better?
    Thank you for any comments.
    Thomas

    • http://nikonrumors.com/ [NR] admin

      Why don’t you try with another software – just download a trial version and see if you get the same problem.

  • Back to top